TAM-RAIL 31000309 Guía de instalación Pagina 1

INSTRUCTION MANUALWhen to use:page up to 6 inches = 1 inchpage up to 12 inches = 1.5 inchpage up to 18 inches = 2 inchpage over 18 inches = 2.5 inch1

10FIXED ANGLE ADAPTER INSTALLATION 22.5° on Post MountInstallation Steps:1. Install and prepare all mounting surfaces and posts to which the TAM‑RAIL

INSTRUCTIONS FOR INSTALLING STRAIGHT RAIL KIT BETWEEN POSTS WITH PRE‑INSTALLED 22.5° OR 45° ANGLE ADAPTERS:1. Measure opening between the bottom rail

It is the responsibility of the installer to meet all building code and safety requirements and to obtain all required building permits. For Tam‑Rail

Important Product Safety and Pre-Installation Information The following installation instructions are provided to guide you through the installation

TAM‑RAIL STRAIGHT RAIL KIT RAIL LENGTHSNominal Rail Length 6' 8' 10'Actual Rail Length 70‑1/4" 93‑7/8" 120"3. Lay the b

FIG. 1Installation Steps:1. Install and prepare posts for TAM‑RAIL Railing installation. Ensure mounting surfaces are level and plumb. (Fig. 1) TAMKO

STAIR RAIL INSTALLATION (continued)5Fig. 7Fig. 810. Determine the location of the top rail metal brackets (marked “T”). Insert balusters in the first

TOOLS REQUIRED FOR INSTALLATION: Tape measure, level, drill, 3/8" drill bit, wrench, safety glasses, and hearing protection.INSTALLATION STEPS:1.

POST MOUNT INSTALLATION CONCRETE APPLICATIONCONCRETE ANCHORS:TAMKO requires the use of the Hilti HIT‑RE 500‑SD adhesive anchoring system in the instal

8. Insert the supplied threaded rods into the boreholes to the required depth, slowly twisting the rods as they are inserted (see Hilti HIT‑RE 500‑S

9POST MOUNT INSTRUCTIONS CONCRETE APPLICATION (continued) FIXED ANGLE ADAPTER INSTALLATION 22.5° on Wood Post, 45° on Wood Post/Post MountInstallation